SVC-01 shock testing system consists of TL9204H vibration/shock measuring instrument, and TL9800-05 software; TL9204H is Built-in 4 CHS Charge amplifiers, IEPE signal conditioners, can input 4 CHS Charge, Voltage or IEPE sensors signal at the same times; Via USB2.0 interface connected with the computer. Built-in 2 CHS DA signal output, can generate half sine, trapezoidal wave, after peak sawtooth wave and pulse signal, etc. Multi I/O can control and detect a shock table. Real-time display working state, the measured acceleration value, pulse width, and velocity variation, measurement error, etc.; Automatic finish test report. Support the national standard, MIL standard, and custom standard. Apply for all kinds of shock tests, drop tests, impact tests, and vibration/shock test.

Main Parameters:

 Acceleration Amplitude(RMS):9.81m/s2(1g)±3%

 Input signal types: Charge(PE), Voltage, IEPE;

 The built-in Gain: Charge 0.1, 1,10,100 mV/pC; Voltage/IEPE: 1,10,100 mV/mV;

 The built-in filter: built-in analog filter + digital anti-aliasing filter;

 AD sampling rate: real-time sampling rate per channel 1 MHZ;

 DA conversion rate: 500 kHz;

 Sampling method:Iinternal trigger;External triggering; continuous recording etc;

 Measurement Range: 1 to 100000 g(PK);

 Measuring pulse width: 0.201 mS to 3000 mS;

 4-input, 2-output;

 Customized software for needs;

Apply for vibration/ shock testing and calibration.;

​

​

​

​

​

​

​

​

​

​